
MIDI Gear Guide: How to Choose a MIDI Controller and the Right Cables
For most home studios the best setup is simple: a USB MIDI controller with the number of keys you will really use, plus one USB cable to your computer. Add 5 pin DIN or 3.5 mm TRS cables only when you want gear to talk to other gear without a computer in the middle.
This guide walks through choosing a controller, picking cables, and wiring a small rig that works with your DAW, your hardware synths and your browser.
What a MIDI controller does
A MIDI controller makes no sound on its own. It sends notes and knob moves as MIDI, and something else turns them into sound. That something can be a plugin in your DAW, a hardware synth, or a synth running in your browser. New to MIDI itself? Read what is MIDI.
That is why a cheap controller can sound amazing. The sound comes from the instrument it plays, not from the keyboard.
How to choose a MIDI controller
Number of keys
- 25 keys fit on a small desk or in a backpack. Great for bass lines, simple melodies and travel. You will switch octaves a lot.
- 49 keys are the sweet spot for most producers. Room for chords in one hand and a bass note in the other.
- 61 keys suit players who use both hands for real.
- 88 keys are for pianists. They are big and heavy, so be sure you need them.
Key feel
Mini keys save space but feel cramped if you have played piano. Full size synth action keys are light and fast. Semi weighted keys have a bit more push back. Fully weighted hammer action feels like a real piano and costs more. Try a few if you can. Booking a few hours in a local studio or rehearsal room through Sesh is an easy way to play real gear before you buy.
Pads, knobs and faders
Pads are for finger drumming and launching clips. Knobs and faders let you move a filter or a volume by hand instead of with a mouse. If you make beats, look for pads that respond to how hard you hit them. If you love sound design, look for at least eight knobs.
Connections
This matters more than most people think.
- USB MIDI connects straight to a computer and often powers the controller too. Almost every modern controller has it.
- 5 pin DIN MIDI out lets the controller play a hardware synth with no computer at all.
- 3.5 mm TRS MIDI does the same job as DIN on smaller gear and Eurorack.
- Class compliant means it works on Mac and Windows without installing a driver. That is what you want for browser tools too.
If you think you will ever own a hardware synth, pick a controller with a DIN or TRS MIDI out.
MIDI cables: DIN, TRS and USB
5 pin DIN
The classic round MIDI cable. It only uses three of its five pins, and each cable carries data in one direction. To connect two pieces of gear both ways you need two cables, one from MIDI out to MIDI in, and one going back.
DIN is great for chaining gear without a computer. Connect your master device's MIDI out to the next device's MIDI in, then use MIDI thru ports to pass the same signal down the line.
3.5 mm TRS MIDI
Many small synths, drum machines and Eurorack modules use a 3.5 mm jack instead of a DIN socket to save space. Watch out: there are two wiring styles, called Type A and Type B. The adapter that came with one device may not work with another brand. Check which type each device uses before you buy adapters.
USB MIDI
One USB cable carries MIDI both ways and can power the device. For a single synth plugged into a computer you need nothing else. For several devices, use a powered USB hub so everything gets enough power.
One catch: USB MIDI needs a host, which is usually your computer. Two USB synths cannot talk to each other over USB alone. For that you need DIN or TRS cables, or a box called a USB host.
Tips for cables that just work
- Keep DIN runs short. The MIDI standard is designed for runs up to about 15 meters. Shorter is safer.
- Use a thru box for long chains. Daisy chaining many thru ports can add small delays. A thru box splits one signal to many outputs at once.
- Choose shielded cables if your setup sits near lots of power cables or lights.
- Label both ends. In a rig with six cables this saves real time.
- Buy the right adapters. A DIN to TRS adapter of the wrong type is the most common reason small gear stays silent.
Wiring a small rig, three ways
Computer only. A USB controller into your computer, playing plugins in your DAW. Cheap, simple and quiet.
Computer in the middle. Controller and synths all plugged into the computer by USB, or through a USB MIDI interface with DIN outs. Your DAW or your browser decides what plays where. This is the most flexible setup.
No computer. A controller or drum machine as the master, DIN or TRS cables out to your synths, with MIDI clock keeping everything in time. Great for jamming away from a screen.
When a device does not show up
Most MIDI problems come down to a few simple things. Work through them in order.
- Check the direction. With DIN cables, MIDI out must go to MIDI in. Out to out does nothing.
- Check the channel. The sender and the receiver must use the same MIDI channel, or the receiver must listen on all channels.
- Plug in first, then open the app. Many programs and browsers only look for devices when they start.
- Close other apps. On Windows, some drivers let only one program use a MIDI port at a time.
- Try another cable or port. Cables do fail, and some USB hubs do not give enough power.
Using your gear with MIDI Lab
MIDI Lab runs in your browser and talks to gear over Web MIDI, which works in Chrome and Edge on a computer. Your normal USB connection is all it needs. There is no extra driver or bridge app.
- Stream to hardware. The Infinite engine plays generative MIDI straight to your synths and drum machines, with each layer on its own MIDI channel. The MIDI for hardware synths page shows the full setup, including clock and Eurorack.
- Download and play over it. Write a track as editable MIDI with the AI MIDI generator, drop the .mid into your DAW, and play your controller over the parts.
- No synth yet? The free online synth runs in your browser, and you can play it with your computer keyboard while you shop for gear.
FAQ
Do I need a MIDI interface? Not if your controller and synths have USB and plug into your computer. You need an interface when a synth only has DIN or TRS MIDI and you want your computer to talk to it.
Are expensive MIDI cables better? Not really. MIDI is a simple digital signal. A well made, shielded cable of the right length is all you need. Spend the money on gear instead.
What is the difference between TRS Type A and Type B? They are two ways of wiring MIDI onto a 3.5 mm jack. Devices from different makers may use different types, so the adapter for one may not work with another. Check each device's manual.
How many keys should my first controller have? For most producers, 49. It is small enough for a desk and big enough for chords and a bass note at the same time.
Can I use a MIDI controller in the browser? Yes, in browsers that support Web MIDI, like Chrome and Edge. Plug it in by USB before you open the page, then allow MIDI access when the browser asks.
Can two USB synths connect to each other directly? Usually not. USB MIDI needs a host, like a computer. To connect two devices without a computer, use DIN or TRS cables, or a USB host box.