MIDI Lab AI LogoMIDI Lab AI
Back to Blog
Web MIDI Guide: Play Hardware Synths, Drum Machines and Eurorack From Your Browser

Web MIDI Guide: Play Hardware Synths, Drum Machines and Eurorack From Your Browser

MIDI LabNovember 17, 2026·8 min read
web-midihardwaremidi-clockeurorackguide

Web MIDI lets a web page send and receive MIDI with the gear plugged into your computer. Open the page in Chrome or Edge, connect your synth by USB, allow MIDI access when the browser asks, and the page can play your hardware directly. There is no plugin, no driver for most class compliant gear, and no DAW in the middle.

This guide explains how Web MIDI works, how to set it up, how MIDI clock keeps your rig in time, and how to drive a Eurorack system from a browser.

What Web MIDI is

Web MIDI is a standard way for browsers to talk to MIDI devices. Your operating system already knows about the synths, drum machines and interfaces you plug in. Web MIDI gives a web page permission to use them, the same way a page can ask to use your microphone.

Once a page has access, it can do two things:

  • Send MIDI out, so the page plays notes on your synth, changes its knobs, or starts and stops your drum machine.
  • Receive MIDI in, so a keyboard, a controller or another device can play or control the page.

That turns the browser into one more piece of studio gear. Anything that shows up as a MIDI port on your computer can join in: USB synths, drum machines, MIDI interfaces with DIN outs, and Eurorack MIDI modules.

Which browsers support Web MIDI

Chrome and Edge on a desktop or laptop have the best support, and they are the browsers to use. Other browsers have limited or no support. Phones and tablets are not a good fit for hardware work today.

On Mac and Windows, class compliant USB devices usually work with no driver at all. Some interfaces still need a driver on Windows, even in class compliant mode, so check the maker's site if a device does not appear.

How to set it up

  1. Use Chrome or Edge on a computer.
  2. Plug in your gear first. Connect your synth, drum machine or MIDI interface by USB before you open the page.
  3. Open the page and allow MIDI access when the browser asks. If you clicked no by mistake, open the site settings next to the address bar and allow MIDI.
  4. Pick the output. Choose your synth or interface from the device list.
  5. Match the channel. Make sure the page sends on the channel your synth listens to.

If a device is missing, check that it was connected before the page loaded, refresh, and close any other app that might be holding the port. On Windows, some drivers let only one program use a port at a time.

Why the browser is a good place for MIDI

Most AI music tools hand you a finished audio file. You can listen to it, but you cannot change one note, and you cannot play it on your own synth.

MIDI is different. It is the notes: which pitch, when, how hard and for how long. You pick the sound. Put it in the browser and you get three things at once:

  • Nothing to install. Open a page and you are ready.
  • Your own sounds. The same notes can play your mono synth, your poly synth, a drum machine or a Eurorack voice.
  • Live control. A page can keep writing and changing MIDI while it plays, which a static file cannot do.

MIDI clock: keeping your gear in time

When more than one device plays at once, they need to agree on the tempo. MIDI clock does that.

  • Clock pulses. The master sends 24 pulses for every quarter note. Faster pulses mean a faster tempo.
  • Start, stop and continue. These messages tell every device when to begin, when to stop and when to pick up again.
  • One master. Only one device should send clock. Everything else follows it.

A few habits make clock reliable:

  • Pick one master and set every other device to follow external clock.
  • Use a thru box for long chains instead of daisy chaining many thru ports.
  • Give gear a moment to lock. Some devices take a beat or two to settle on a new tempo. Press play a bar early in a live set.

How MIDI Lab uses Web MIDI

MIDI Lab's Infinite engine plays generative MIDI from your browser straight to your hardware. That makes it a MIDI sequencer for your whole rig.

  • Up to 16 layers. Pads, arps, bass, leads, percussion, drums and custom instruments, one layer for each MIDI channel.
  • A channel per layer. Channels are set for you, with drums on channel 10. You can change any layer's channel and pick a different output for each one, so a poly synth, a drum machine and an interface can all play from one session.
  • Clock both ways. Infinite can send clock with start and stop so your gear follows it, or follow clock from a DAW or another device and take its tempo.
  • Evolve while it plays. Type how one layer should change, like busier, darker or sparser, and only that layer is rewritten. The rest keeps playing.
  • A signal monitor. A panel shows the MIDI going out and coming in, so you can check your wiring without guessing.
  • Your synth, mapped. Device profiles teach MIDI Lab the knob map of a real synth, and you can teach it a custom one with MIDI learn. These are features of the paid plans.

Generating a session needs a free account and a computer. On a phone you can watch and join a jam, but not start one.

The MIDI for hardware synths page walks through this setup step by step.

Driving Eurorack from the browser

Eurorack modules speak control voltage, not MIDI. A MIDI to CV module or interface sits in between and turns MIDI into voltages your rack understands.

  • Pitch CV. Most of Eurorack uses one volt per octave. The converter turns each MIDI note into the right voltage.
  • Gates and triggers. A note on becomes a gate that stays high while the note is held, or a short trigger for drums and envelopes.
  • Velocity. Many converters send velocity as its own voltage. Patch it to a filter or an envelope for expression.
  • Clock. A converter can turn MIDI clock into clock pulses, so sequencers and LFOs in the rack follow the same tempo.

The setup is simple. Connect a USB MIDI to CV interface to your computer, or a USB MIDI interface into a MIDI to CV module. Open the browser, pick the interface as the output, and send each layer on its own channel. Converters with several channels can then send each layer to a different voice in your rack. It is like turning every voice into its own synth, all playing from one session.

Check the converter's manual for how it maps channels to outputs. Some take one channel per output pair, others let you set it up any way you like.

Common problems and fixes

  • No device in the list. Plug it in before opening the page, refresh, and allow MIDI in the site settings.
  • Notes but no sound. Check the MIDI channel and make sure the synth's volume is up.
  • Drifting tempo. Make sure only one device sends clock and the others follow it.
  • Stuck notes. Stop and start again, or turn the synth off and on. A missed note off message is usually the cause.
  • Wrong notes on Eurorack. Tune your oscillator and check that the converter's pitch output is set to one volt per octave.

FAQ

Does Web MIDI work in every browser? No. Chrome and Edge on a computer work best. Other browsers have limited or no support.

Do I need a driver? Usually not. Most class compliant USB MIDI devices work without one on Mac and Windows. Some interfaces need a driver on Windows.

Can a browser send MIDI clock? Yes. A page with Web MIDI access can send clock, start and stop, so your drum machines and sequencers follow its tempo.

Is Web MIDI safe? The browser asks before a site can use your MIDI devices, and you can take that permission back at any time in the site settings.

Can I control Eurorack from a browser? Yes, through a USB MIDI to CV interface or a MIDI interface into a MIDI to CV module. The browser sends MIDI and the converter turns it into pitch, gate and clock voltages.

Do I need a DAW? No. With Web MIDI the browser can play your gear directly. You can still record the audio or the MIDI into a DAW if you want to keep it.